In order to ensure the proper functioning of a program such as emule, or to be able to operate correctly the services of a server, we will need to enjoy a fixed or static IP, in the same way, if we want to access web pages blocked by our Internet company, we will need to use a different DNS.
Both changes are very simple to do, you only need to know where to look and what IP and DNS to put, once we know, we will only have to change the configuration of our network that default goes to automatic, which means that every time we turn on The computer downloads a different router configuration.
And we will change this configuration for the new one that will be fixed and that we will assign manually, which means that it will always be the same, which does not give certain advantages like for example if we want to open certain ports in the router, since the ports open for A specific IP, and if we open the ports for one IP and use another, the ports will remain closed for that new IP.
The first thing we have to do to have a fixed or static IP, is to find out what IP can and usually gives the router, for this, we must go to the program “run” that we will find in the Windows start menu, and write in ” CMD “and give it to execute, or also depending on the version of Windows that you have, you can go to the start search bar and type in it” CMD “or” symbol of the system “and when we appear under any of the 2 Names entered into it.
Once we have executed the CMD or symbol of the system, we will see a black screen where we should write the command “ipconfig / all”, which will give us all our network configuration, and from where we will get the parameters that we will use to make the configuration That we need to put an IP as fixed or static, as you can see in the following screen:
The data we need from the previous screen, are the IP address, the gateway and the subnet mask, we point that data on a paper, and we go to the following address according to the operating system we have:
If we have Windows XP or Windows Server 2003: We will go to Start >> Control panel >> Network connections >> local area connection >> properties we select the TCP / IP protocol option.
If we have Windows 7, Windows 8 or Windows 10: We will go to Start >> Control Panel >> Network and Internet >> Network and Sharing Center >> change adapter settings >> enabled adapter properties >> properties >> select the option TCP / IP IPV4 and press the option properties.
Once we have gone to one of the 2 previous addresses, we will see the following window, and there we have to put the data that we have previously noted of “ipconfig / all”:
In the IP field, we will put the IP address that we have pointed out before, the subnet mask will be automatically filled, as for the DNS servers, we will always put the ones offered by Google, which are 184.108.40.206 and 220.127.116.11, which Are much better and faster than those of the companies of Internet, in addition if the companies have blocked a web via DNS, we can enter equally not to use theirs, then it is only accept and leave for the changes to take effect.
And already, we already have our network configured in a fixed or static, if we want to return it to dynamic, we will only have to redo the same steps and mark the option of automatic and accept, and you will have changed again. I hope this article has been helpful, thank you very much for your visit and I hope that you return very soon.In order to ensure the proper functioning of a program such as emule, or to be able to operate correctly the services of a server, we will need to enjoy a fixed or static IP, in the same way, if we want to access web pages blocked by our Internet company, we will need to use a different DNS.